NHML Resources - ASTM Test Resources

A90 Test Method for Weight (Mass) of coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings, 01.06

A247 Test Method for Evaluating the Microstructure of Graphite in Iron Castings, 01.02

A262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels, 01.03

A309 Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test, 01.06

A370 Test Methods and Definitions for Mechanical Testing of Steel Products, 01.01, 01.02, 01.03, 01.04, 01.05

A428 Test Method for Weight of Coating on Aluminum-Coated Iron or Steel Articles, 01.06

A649 Specification for Forged Steel Rolls Used for Corrugating Paper Machinery, 01.05

B136 Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum, 02.05

B137 Test Method for Measurement of Coating Mass Per Unit Area of Anodically Coated Aluminum, 02.05

B154 Test Method for Mercurous Nitrate Test for Copper and Copper Alloys, 02.01

B212 Test Method for Apparent Density of Free-Flowing Metal Powders, 02.05

B263 Test Method for Determination of Cross-Sectional Area of Stranded Conductors, 02.03

B277 Test Method for Hardness of Electrical Contact Materials, 02.04

B279 Test Method for Stiffness of Bare Soft Square and Rectangular Cooper and Aluminum Wire for Magnet Wire Fabrication, 02.03

B294 Test Method for Hardness Testing of Cemented Carbides, 02.05

B390 Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides, 02.05

B487 Test Method for Measurement of Metal Oxide Coating Thickness by Microscopical Examination of a Cross Section, 02.05

B498 Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR), 02.03

B557 Test Methods of Tension Testing Wrought and Cast Aluminum and Magnesium-Alloy Products (Metric), 02.02

B571 Test Methods for Adhesion of Metallic Coatings, 02.05

B578 Test Method for Microhardness of Electroplated Coatings, 02.05

B809 Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor ("Flowers-of Sulfur"), 02.05

E3 Practice for Preparation of Metallographic Specimens

E8 Test Methods for Tension Testing of Metallic Materials

E9 Test Methods of Compression Testing of Metallic Materials at Room Temperature, 03.01

E10 Test Method for Brinell Hardness of Metallic Materials, 03.01

E18 Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials, 03.01

E45 Test Methods for Determining the Inclusion Content of Steel, 03.01

E110 Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers, 03.01

E112 Test Methods for Determining Average Grain Size, 03.01

E168 Practices for General Techniques of Infrared Quantitative Analysis, 03.06

E190 Test Method for Guided Bend Test for Ductility of Welds, 03.01

E223 Test Methods for Analysis of Sulfuric Acid, 15.05

E224 Test Methods for Analysis of Hydrochloric Acid, 15.05

E252 Test Method for Thickness of Thin Foil and Film by Weighing, 02.02

E334 Practices for General Techniques of Infrared Microanalysis, 03.06

E340 Test Method for Macroetching Metals and Alloys, 03.01

E345 Test Methods of Tension Testing of Metallic Foil, 03.01

E384 Test Method for Microhardness of Materials, 03.01

E407 Practice for Microetching metals and Alloys, 03.01

Latest Resources

  • April 2, 2008 - Glass Vial Sprinkler Accidents – If any of your sprinklers has a glass vial please read on since this article discusses the unexpected release of an enormous amount of water when one of these sprinklers trips.
  • April 1, 2007 - Embrittlement of Steels – Practical advice on the embrittlement of steels and new steels that can enhance the performance of critical mechanical parts.
  • May 1, 2006 - Hydrolysis of Fiberglass – Hydrolysis Failures of Fiberglass: delamination, blistering & bleeding.
  • June 1, 2005 - High Cycle Fatigue

View All Resources >>

Latest Newsletters

Nuts & Bolts, V23

View All Newsletters >>

Related Materials